Brass Laser Cutting Machine - Glorystar Laser

Brass Laser Cutting Machine

The Ultimate Solution to Make Fast, Accurate and Beautiful Brass Cuts

why use laser for brass cutting?

Laser cutting is often the preferred method for cutting brass due to its precision, speed, efficiency, and cost-effectiveness. Compared to other cutting methods like plasma cutting, flame cutting, laser cutting offers the following advantages:

Precision: Laser cutting is highly precise and the cutting slit is narrow. It can produce intricate and complex cuts with minimal material waste.  Moreover, since brass is reflective, the use of fiber lasers with shorter wavelengths allows for lower reflectivity and even more precise cutting.

Broader Applicability: Laser cutting can handle both thin brass sheets and thick sheets. Especially, it can cut through thinner materials than some other methods, such as plasma cutting, which may be better suited for thicker materials, and may not be as effective for cutting thinner brass sheets or components.

Clean Cuts: Laser cutting produces a clean, smooth edge with minimal burring, which can minimize the need for additional finishing or polishing. And it produces a smaller heat affected zone that helps to minimize distortion and preserve material properties near the cut.

Speed: Lasers can cut through brass quickly, which makes the process faster than other methods.

Cost-effective: Laser cutting equipment may be expensive than other cutting methods. However, the process can be cost-effective in the long run due to its speed, precision, and minimal material waste.

which laser should I choose for cutting brass?

Brass is a high thermal conductivity and reflectivity metal, so cutting it with a laser will be challenging.

CO2 lasers and fiber lasers are two common types of laser cutting machines. Compare to fiber laser, co2 is cheaper and can cut more materials, even non-metals. Are you quite excited about this? However, it is often not the best choice for cutting brass. Because it is difficult to be absorbed by brass and reflects too much, making cutting less efficient and can even damage the machine.

Therefore, by comparison, I would recommend the fiber laser more. It has a shorter wavelength and greater energy output to heat and melt the brass fast. At this molten state, the reflection of the brass will go down a lot, making it easier to cut through and makes smooth edges.

If you are looking for a perfect laser cutting solution to make fast, accurate and beautiful brass cuts, the fiber laser cutter is your ideal choice.

Choose Your Right Brass Laser Cutting Machine

To choose a suitable brass laser cutting machine, you need to consider the following factors:

1. Laser Power (Material Requirements)

Consider the thicknesses of brass materials you will be cutting, and choose a machine with enough laser power to handle them.
Here is the cutting capacity of our brass laser cutters, you can choose the corresponding laser power according to the cutting thickness range of brass in the form.


2. Bed Size (Material Size)

Consider the size of the brass materials you will be cutting and choose a machine with a bed size that can accommodate them.
To meet the cutting needs of different material sizes of different customers, we offer brass laser cutting machines in various sizes, with the processing format of up to 13000 x 3000mm (42.65 x 9.84 ft).

3. Cutting Speed (Production Volume)

Consider the amount of brass cutting you will be doing on a regular basis, choose a laser cutting machine with a suitable cutting speed to accommodate your production volume.
Our laser cutting machines can cut brass at speeds of up to 60m/min. This means they can quickly and efficiently process large quantities of brass sheets, saving time and increasing productivity.

4. Cutting Precision

The precision of the laser cutting machine is critical for creating high-quality cuts. Therefore, it is important to choose a machine with high accuracy and repeatability.
Our  laser cutting machine adopts the most advanced fiber laser cutting technology, resulting in a small, precise laser beam that cuts brass with accuracy and small error, less than 0.01mm. With this technology, consistent, repeatable, and high quality results are guaranteed.

5. Cost & Budget

When shopping for a brass laser cutting machine, there is a wide range of prices available. To make the right choice, think about the features and capabilities you need and compare them with your budget. Although it might be tempting to opt for the cheapest option, it is essential to also consider long-term cost-effectiveness.

6. Service & Support

Reliable service and support are crucial to the long-term success of a laser cutting machine. Choose a machine from a supplier with a good reputation for customer service and technical support, and make sure they provide adequate training and after-sales support.

7. Future Expansion

Consider any potential future expansion or growth of your business, and choose a laser cutting machine that can be upgraded or expanded if necessary.

By carefully considering these factors and doing thorough research, you can select the best brass laser cutter for your specific needs.

We Provide Best Brass Laser Cutter For You

Our laser cutting machines are available with up to 30KW of power and cut brass up to 30mm (1.18″) thick.

small fiber laser cutting machine-right side

Equipped with 1.5-6KW Fiber Laser Source and the processing format of 1510/3015, full cover and compact design, space-saver

closed type fiber laser cutting machine

Equipped with 3-80KW Fiber Laser Source and the processing format of 3015/4020/6020/6025/8025/12025 optional

super high power fiber laser cutting machine

Equipped with 20-80KW Fiber Laser Source and the processing format of 4020/6020/6025/8025/12025 optional, designed for thick brass sheets cutting

single table laser cutting machine

Equipped with 1-12KW Fiber Laser Source and the processing format of 3015/4015/4020/6015/6020/6025 optional, an entry level model for brass plates cutting

exchange table fiber laser cutting machine left side

Equipped with 1-15KW Fiber Laser Source and the processing format of 3015/4015/4020/6015/6020/6025 optional


GS-L Series Ground-rail Style Large-format Metal Laser Cutting Machine

Equipped with 2-30KW Fiber Laser Source and the processing format of 4020/6020/6025/8025/12025/13030 optional, allowing to freely customize processing format, designed for large format brass plates cutting

Why Choose Us

We understand the significance of both product quality and service for our customers. Therefore, we not only provide products that boast exceptional performance but also have a excellent service
Unparalleled Stability

Unparalleled Stability

Our laser cutting machines undergo strict quality control, are stable enough to run 24/7 with almost no downtime and keep your brass processing projects completed on schedule.


Full Certification

Our laser cutting machines have passed CE, ISO, FDA, SGS and other certification, we are always committed to provide you with the safest and the best quality machine to help you achieve your goals.


Full Service

We have an experienced sales team, skilled R&D team, and responsive after-sales team available to assist you every step of the way. With our full range of services, you can trust us to provide reliable and effective support throughout the entire lifespan of your machine.

22mm brass cut by 20000w laser cutting machine
Play Video about 22mm brass cut by 20000w laser cutting machine

Laser Cutting Samples

laser cutting brass sample
laser cutting brass sample
laser cutting brass sample
laser cutting brass sample

Get Your Brass Cutting Solution

What’s your brass cutting idea and plan? Don’t hesitate to contact us and let us know your requirements. Your extraordinary brass cutting solution will start here!

Industry Application

Brass laser cutting machines have a wide range of applicability in various industries due to the versatility of brass material and the precision of the laser cutting process. Some of the industries that commonly use brass laser cutters include decoration industry, advertising industry, jewelry industry, home appliance industry, machinery manufacturing industry, metal fabrication industry, and many others.

brass letters

Advertising Industry

Brass letters

For advertising industry, brass laser cutters can be used to create a variety of advertising and promotional items. For example, a brass sign with a company logo or name can be easily created using a brass laser cutting machine. The machine can produce precise cuts with sharp edges, creating a clean and professional look for the sign. This will reflect well on the company or brand.

Jewelry Industry

Brass Earrings

Brass is a popular material for creating jewelry due to its unique color and affordability. For jewelry industry, brass laser cutting machines can be used to create intricate designs and patterns, and beautiful cuts with high precision, making them ideal for creating custom brass jewelry pieces.

Metal Decoration Industry

Brass screen

In the decoration industry, brass is a popular material due to its unique appearance and durability. With the ability to cut brass with high accuracy and repeatability, laser cutting machines can be used to create a variety of decorative items that require precision and intricate designs, including decorative screens, lighting fixtures and lampshades, and many others.

metals that can be cut by fiber laser cutter

Which Metals Can Be Cut by a fiber laser cutting machine?

In addition to brass, our fiber laser cutting machine can also cut the following metals:

Want To Ask Something From Us?

Yes, a laser cutter can cut brass. Brass is a popular material to cut with laser cutting technology. Thanks to the high precision and accuracy of the laser, it is well-suited for intricate designs and small details often found in brass parts. 

Fiber lasers and CO2 lasers are common use laser source. For cutting brass, fiber lasers are the most suitable laser source. This is because brass has a high reflectivity to traditional CO2 lasers, which makes it difficult for the laser to efficiently absorb and cut through the material. Fiber lasers have shorter wavelengths, allowing them to be better absorbed by the brass, resulting in a more efficient and precise cutting process.

The cost of a  brass laser cutter can vary widely depending on several factors such as the laser power, size, and capability of the machine. You can tell us the brass thickness and size you need to cut and your other requirements, we will recommend the most suitable machine that fits your specific needs and budget.

Send Your Inquiry Now

Leizi New Form
Update cookies preferences
Scroll to Top